Installation & Foundations

The installation process

The build itself normally takes two consecutive days on site. All installation technicians are directly employed and trained by WOHOBO, so the process is very well refined and consistent.

Working space around the studio

Ideally, we need around 50cm of working space around the studio during installation.
This is because the studio is assembled from the outside in, and the team needs safe space to:

  • position ladders
  • access the base at ground level
  • install structural fixings around the perimeter

Once the frame is assembled, it cannot simply be moved sideways into position afterwards, so this working space is a practical installation requirement.

In some situations we can reduce the gap slightly, or work up to a boundary if a fence panel can be temporarily removed and there is safe working space on the other side.

Foundations and base options

WOHOBO studios can be installed using:

  • ground screws – typically used on lawn or soil
  • adjustable risers – used on existing solid bases such as paving, concrete or gravel grids
  • a hybrid combination of both systems where site conditions vary

All three approaches support the structure securely, allow precise levelling, and create airflow beneath the studio.

Practical note about ground conditions

Ground conditions are not always predictable until installation begins. Even if the ground appears suitable for ground screws, we strongly recommend having a few spare paving slabs available on installation day. If hidden obstructions are encountered underground, we can often switch to risers on slabs so the installation can continue without delay.

If you send us a few photos and basic measurements, we can normally advise very quickly on the most suitable installation and foundation setup.

Not found what you're looking for?

Get in touch and we’ll talk it through with you.